ls k380, lo k380, ly k380, lg k380, lp k380 argus ? led 3 mm (t1) led, non diffused 2002-03-15 1 besondere merkmale ? geh ? usetyp: eingef ? rbtes, klares 3 mm (t1) geh ? use mit spezieller linse besonderheit des bauteils: mit einsatz eines ? u ? eren reflektors zur hinterleuchtung von leuchtfeldern und lcd-anzeigen; l ? tspie ? e mit aufsetzebene wellenl ? nge: 628 nm (super-rot), 606 nm (orange), 587 nm (gelb), 570 nm (gr n), 560 nm (pure green) abstrahlwinkel: angepasst an einsatz mit ? u ? erem reflektor, siehe diagramm technologie: gaalp (super-rot, orange, gelb, gr n), gap (pure green) optischer wirkungsgrad: 1,5 lm/w (super-rot, orange, gelb), 2,5 lm/w (gr n), 0,6 lm/w (pure green) gruppierungsparameter: lichtstrom l ? tmethode: wellenl ? ten (ttw) verpackung: sch ttgut, gegurtet lieferbar anwendungen einsatz mit ? u ? erem reflektor optischer indikator hinterleuchtung (lcd, schalter, tasten, displays) innenbeleuchtung im automobilbereich (z.b. instrumentenbeleuchtung, u. ? .) einkopplung in lichtleiter features package: colored, clear 3 mm (t1) package with specially shaped lens feature of the device: for backlighting and lcds with use of a reflector; solder leads with stand-off wavelength: 628 nm (super-red), 606 nm (orange), 587 nm (yellow), 570 nm (green), 560 nm (pure green) viewing angle: matched to use with external reflector, see diagram technology: gaalp (super-red, orange, yellow, green), gap (pure green) optical efficiency: 1.5 lm/w (super-red, orange, yellow), 2.5 lm/w (green), 0.6 lm/w (pure green) grouping parameter: luminous flux soldering methods: ttw soldering packing: bulk, available taped on reel applications use of reflector optical indicators backlighting (lcd, switches, keys, displays) interior automotive lighting (e.g. dashboard backlighting, etc.) coupling into light guides
2002-03-15 2 ls k380, lo k380, ly k380, lg k380, lp k380 helligkeitswerte werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 11 % ermittelt. luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. anm.: die standardlieferform von serientypen beinhaltet eine untere bzw. eine obere familiengruppe oder mindestens zwei einzelgruppen. in einer verpackungseinheit / gurt ist immer nur eine helligkeitsgruppe enthalten. die technologiebedingte helligkeits-streuung der heutigen led-herstellprozesse ber einen l?ngeren fertigungszeitraum (halbleitermaterial - chipherstellung - montageprozess) erlaubt keine zusage einer einzelnen helligkeitsgruppe. daher mssen mindestens zwei helligkeitsgruppen vorgesehen werden! note: the standard shipping format for serial types includes a lower or upper family group or at least two individual groups. no packing unit / tape ever contains more than one luminous intensity group. luminosity variations caused by the technology used in current led manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign leds to a single luminous intensity group. for this reason at least two luminous intensity groups must be provided! . typ type emissionsfarbe color of emission geh ? usefarbe color of package lichtstrom luminous flux i f = 15 ma v (mlm) bestellnummer ordering code ls k380-lp ls k380-n ls k380-p ls k380-q ls k380-nr super-red red clear 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 q62703-q1768 q62703-q0760 q62703-q1003 q62703-q1004 q62703-q2223 lo k380-lp lo k380-n lo k380-p lo k380-q lo k380-nr orange orange clear 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 q62703-q1888 q62703-q2227 q62703-q2228 q62703-q2229 q62703-q2201 ly k380-lp ly k380-n ly k380-p ly k380-q ly k380-nr yellow yellow clear 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 q62703-q1769 q62703-q0575 q62703-q0576 q62703-q3844 q62703-q2224 lg k380-lp lg k380-n lg k380-p lg k380-q lg k380-nr green green clear 11.2 ... 71.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ... 112.0 28.0 ... 180.0 q62703-q1770 q62703-q0759 q62703-q1034 Q62703-Q3193 q62703-q2225 lp k380-kn lp k380-l lp k380-m lp k380-n lp k380-lp pure green colorless clear 7.1 ... 45.0 11.2 ... 18.0 18.0 ... 28.0 28.0 ... 45.0 11.2 ... 71.0 q62703-q2506 q62703-q3215 q62703-q2610 q62703-q2605 q62703-q3217
ls k380, lo k380, ly k380, lg k380, lp k380 2002-03-15 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit ls, lo, ly, lg lp betriebstemperatur operating temperature range t op ? 55 ? + 100 c lagertemperatur storage temperature range t stg ? 55 ? + 100 c sperrschichttemperatur junction temperature t j + 100 c durchlassstrom forward current i f 40 30 ma sto ? strom surge current t 10 s, d = 0.005 i fm 0.5 a sperrspannung reverse voltage v r 5v leistungsaufnahme power consumption p tot 130 95 mw w ? rmewiderstand 1) thermal resistance sperrschicht/umgebung junction/ambient sperrschicht/l ? tpad junction/solder point montage auf pc-board fr 4 (padgr ?? e 16 mm 2 ) mounted on pc board fr 4 (pad size 16 mm 2 ) minimale beinchenl ? nge minimum lead length r th ja r th js 400 180 k/w k/w 1) r th erh ? ht sich um 13 k/w pro mm beinchenl ? nge. each additional 1 mm of lead length increases r th by 13 k/w.
2002-03-15 4 ls k380, lo k380, ly k380, lg k380, lp k380 kennwerte ( t a = 25 c) characteristics bezeichnung parameter symbol symbol wert value einheit unit ls lo ly lg lp wellenl ? nge des emittierten lichtes (typ.) wavelength at peak emission i f = 15 ma peak 635 610 586 572 557 nm dominantwellenl ? nge 1) (typ.) dominant wavelength i f = 15 ma dom 628 606 587 570 560 nm spektrale bandbreite bei 50 % rel max (typ.) spectral bandwidth at 50 % rel max i f = 15 ma ? 45 40 45 25 22 nm durchlassspannung 2) (typ.) forward voltage (max.) i f = 15 ma v f v f 2.1 2.5 2.1 2.5 2.1 2.5 2.1 2.5 2.1 2.5 v v sperrstrom (typ.) reverse current (max.) v r = 5 v i r i r 0.01 10 0.01 10 0.01 10 0.01 10 0.01 10 a a temperaturkoeffizient von peak (typ.) temperature coefficient of peak i f = 15 ma; ? 10 c t 100 c tc peak 0.11 0.12 0.10 0.11 0.11 nm/k temperaturkoeffizient von dom (typ.) temperature coefficient of dom i f = 15 ma; ? 10 c t 100 c tc dom 0.07 0.07 0.07 0.07 0.05 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 15 ma; ? 10 c t 100 c tc v ? 1.9 ? 1.9 ? 1.9 ? 1.4 ? 2.1 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 15 ma opt 1.5 1.5 1.5 2.5 0.6 lm/w 1) wellenl ? ngen werden mit einer stromeinpr ? gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt. wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) spannungswerte werden mit einer stromeinpr ? gedauer von 1 ms und einer genauigkeit von ?,1 v ermittelt. voltages are tested at a current pulse duration of 1 ms and a tolerance of ?.1 v.
ls k380, lo k380, ly k380, lg k380, lp k380 2002-03-15 5 relative spektrale emission i rel = f ( ), t a = 25 c, i f = 15 ma relative spectral emission v( ) = spektrale augenempfindlichkeit standard eye response curve abstrahlcharakteristik i rel = f ( ? ) radiation characteristic % rel ohl01697 100 80 60 40 20 0 400 450 500 550 600 650 700 nm i pure-green green yellow orange super-red v 0 0.2 0.4 1.0 0.8 0.6 ? 1.0 0.8 0.6 0.4 0? 10? 20? 40? 30? ohl01277 50? 60? 70? 80? 90? 100? 0? 20? 40? 60? 80? 100? 120?
ls k380, lo k380, ly k380, lg k380, lp k380 2002-03-15 6 durchlassstrom i f = f ( v f ) forward current t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current ls, lo, ly, lg relativer lichtstrom v / v(15 ma) = f ( i f ) relative luminous flux t a = 25 c maximal zul ? ssiger durchlassstrom i f = f ( t ) max. permissible forward current lp 10 -1 v pure-green 5 super-red orange/yellow green ohl02145 i f f v 0 10 1 10 2 10 5 ma 1.0 1.4 1.8 2.2 2.6 3.0 3.4 0 ohl00538 f ? c t 0 20 40 60 80 100 ma 10 20 30 40 50 temp. solder point temp. ambient t a t s t s a t ohl02103 10 i f v (15ma) v -1 0 10 1 10 10 2 ma -3 10 10 -2 -1 10 0 10 1 10 pure-green red green yellow super-red 0 ohl00984 i f ? c t 0 20 40 60 80 100 10 20 30 40 ma temp. solder point temp. ambient t a t s t s a t
ls k380, lo k380, ly k380, lg k380, lp k380 2002-03-15 7 relativer lichtstrom v / v(25 c) = f ( t a ) relative luminous flux i f = 15 ma zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c ls, lo, ly, lg zul ? ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c lp yellow green orange super-red pure-green 0.0 ohl02107 ? c a t 0 20 40 60 80 100 v v (25 ? c) 0.4 0.8 1.2 1.6 2.0 ohl01162 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.1 0.2 0.5 dc 10 1 5 i f t 2 10 3 10 4 10 5 ma p ohl01686 s 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t d i t t p f t p = d = 0.005 0.01 0.02 0.05 0.2 0.5 dc 10 1 5 i f t 2 10 0.1 p 10 3 ma
2002-03-15 8 ls k380, lo k380, ly k380, lg k380, lp k380 ma ? zeichnung package outlines ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). kathodenkennung: k ? rzerer l ? tspie cathode mark: short solder lead gewicht / approx. weight: 160 mg 2.05 (0.081) 2.35 (0.093) 2.9 (0.114) 3.5 (0.138) 3.1 (0.122) 2.8 (0.110) 4.8 (0.189) 4.4 (0.173) 3.6 (0.142) 3.2 (0.126) cathode gexy6712 spacing 2.54 (0.100) 0.4 (0.016) 0.6 (0.024) 0.7 (0.028) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) area not flat 1.1 (0.043) 0.9 (0.035) 1.8 (0.071) 1.2 (0.047) 29.0 (1.142) 27.0 (1.063) 0.6 (0.024) 0.4 (0.016)
ls k380, lo k380, ly k380, lg k380, lp k380 2002-03-15 9 l ? tbedingungen soldering conditions wellenl ? ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) empfohlenes l ? tpaddesign wellenl ? ten (ttw) recommended solder pad ttw soldering ma e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangsk ? hlung forced cooling normalkurve standard curve grenzkurven limit curves 4 (0.157) ohlpy985 4.8 (1.890)
2002-03-15 10 ls k380, lo k380, ly k380, lg k380, lp k380 published by osram opto semiconductors gmbh & co. ohg wernerwerkstrasse 2, d-93049 regensburg ? all rights reserved. attention please! the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 1 may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. revision history: 2002-03-15 previous version: 2001-02-14 page subjects (major changes since last revision) 3 thermal resistance (footnote) 4 value (wavelength orange)
|
